Wall-Mount To Tabletop Installation - AT&T EL52100 User Manual
Dect 6.0 cordless telephone/answering system with
caller id/call waiting
Hide thumbs
Also See for EL52100:
- User manual (80 pages) ,
- Quick start manual (30 pages) ,
- Quick start manual (34 pages)
Table of Contents
Advertisement
Getting started
Wall-mount installation
Wall-mount to tabletop installation
To change the telephone base from the wall-mount installation to tabletop
installation, follow the steps mentioned below.
1.
Unplug the large end of the larger power adapter from the electrical outlet.
2.
If the telephone line cord and power adapter cord are bundled, untie
them first. Slide the wall-mount bracket up and remove it from the wall-
mounting plate. Unplug the end of the telephone line cord from the
telephone wall jack.
3.
Lift the telephone base up to detach it from the wall-mount bracket.
4.
Refer to Telephone base installation on page 4 to install the telephone base.
9
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the EL52100 and is the answer not in the manual?