After Finishing Work - Stihl SR 430 Instruction Manual

English
Fan jet baffle screen
Spray is broadened and softened.
– for treating plants at close range (< 1.5 m)
– reduces damage to plant, especially in sensi‐
tive phases of plant growth
45° deflector screen
Diverts spray jet at an angle of 45°
– for under-leaf treatment
– to increase discharge rate when spraying
upwards
– for targeted treatment of low-growing crops.
Helps reduce problem of spray mist being car‐
ried away by the wind when spraying down‐
wards.
Dual deflector screen
Splits the spray jet in two directions.
– Allows two closely planted rows to be treated
simultaneously.
24

16 After Finishing Work

16.1 Draining the Solution Container
► Close the valve lever
► Shut off the engine – see "Starting / Stopping
the Engine"
► Turn the dosage piece (1) to position "6" or "E"
and collect the remaining solution in a suitable
container
16.2 Cleaning the Solution Con‐
tainer
► Rinse and clean the solution container and
hose system with clear water
► Dispose of remaining spray solution and rins‐
ing liquid in accordance with local environmen‐
tal requirements – follow maker's instructions
► Allow the machine to dry with the cap removed
If strainer is dirty:
► Insert a suitable tool (e.g. screwdriver) in the
two recesses (arrows) to loosen the
strainer (1)
► Pull the strainer (1) upward and out of the sol‐
ution container
16 After Finishing Work
1
0458-454-8221-F