Table 2-2. Fax Class 2.0 AT Command Set (continued)
Command Option
4
5
6
7
8
9
10
11
12
13
14
16
24
48
96
+FBO=
0
1
+FCR=n
0
1
+FBU
0
1
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
3460 Fast'R
Description
9600 BPS
12.0 KBPS
14.4 KBPS
16.8 KBPS
19.2 KBPS
21.6 KBPS
24.0 KBPS
26.4 KBPS
28.8 KBPS
31.2 KBPS
31.2 KBPS
38.4 KBPS
57.6 KBPS
115.2 KBPS
230.4 KBPS
Controls mapping between PSTN facsimile data and the
DTE-DCE link, for Phase C and Phase B/D data.
Direct bit order for all data
Reversed bit order for Phase C data; direct bit order for
Phase B/D data
Specifies whether the modem can receive message data.
The modem cannot receive message data and cannot poll
a remote device. The modem can send data and it can be
polled for a document
The modem can receive message data.
Controls HDLC frame reporting
Disable
Enable
C-9