Motorola 3460 Fast'R Reference Manual page 71

Table 2-2. Fax Class 2.0 AT Command Set (continued)
Command Option
+FCS=
VR, BR,
WD, LN,
DF, EC,
BF, ST
+FLI= a
+FPI= a
+FNR= r, t, i, n
0
1
+FPS= n
1
2 - 4
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
3460 Fast'R
Description
Sets negotiated T.30 parameters for session.
See Table 2-8
Defines local ID string a for TSI/CSI signals. Sent to
remote modem.
Defines local polling ID string a for CIG signals. Sent to
remote modem.
Controls the reporting of messages generated during
T.30 Phase B negotiations.
r - RX parameter messages
t - TX parameter messages
i - ID string messages
n - non-standard frame messages
For each sub-parameter, the options are:
Prevents reporting of messages
Reports messages
Contains value representing T.30 post page response;
includes page quality and end-of-page status
See Table 2-7
See Table 2-7
C-7