Motorola 3460 Fast'R Reference Manual page 72

Table 2-2. Fax Class 2.0 AT Command Set (continued)
Command Option
+FCQ=r, t
r options:
0
1
2
t options:
0
1
2
+FLO=n
0
1
2
+FPR=n
1
2
3
The characters AT or at precede all commands except: +++, #####, and A/
Parameters and options shown shaded gray vary by country. For your country's options,
refer to the 3460 Fast'R Reference Guide (T0022).
Default (pre-set) options are underlined.
C-8
3460 Fast'R
Description
Controls copy quality checking (conformance to
negotiated T.4 format) and correction by fax modem of:
r - Received image data
t - Transmitted image data
Disables receive copy quality checking. The modem
generates MCF (Copy Quality OK) responses and sets
+FPS=1.
Enables receive copy quality checking. The modem
determines the post-page message and stores it in the
+FPS parameter.
Enables receive copy quality checking. The modem
determines the post-page message, stores it in the +FPS
parameter, and detects and corrects errors in data
received from the remote station.
Disables transmit copy quality checking.
Enables transmit copy quality checking. The modem
returns <CAN> to the computer if errors are detected
Enables transmit copy quality checking. The modem
detects and corrects errors in the data received from the
local computer.
Flow Control
Specifies the computer/modem flow control method.
None
XON/XOFF
RTS/CTS
Serial Port Rate
Specifies the computer/modem serial port rate. This
parameter has no effect when +FCLASS=0.
2400 BPS
4800 BPS
7200 BPS