Download Print this page

Motorola 3460 Fast'R Reference Manual: Configuration Commands

Motorola modem reference guide.
Hide thumbs

Advertisement

Table 2-1. Fax Class 1 AT Command Set (continued)
Command Option
+FRM=n
n
+FRS=n
n
+FTH=n
n
+FTM=n
n
+FTS=n
n
+FLO=n
0
1
2
+FPR=n
1
2
3
4
5
6
7
8
The characters AT or at precede all commands except: +++, #####, and A/
Default (pre-set) options are underlined.
3460 Fast'R
Specifies the modulation mode, training time, and data
rate for received fax data without HDLC framing.
Same options as +FRH
Waits for silence to be present on the line for the
specified time. It responds "OK" to the DTE when the
required length of silence has been detected or the DTE
sends a character other than XON or XOFF, which are
discarded.
n = ms.
Specifies the modulation mode, training time, and data
rate for the modem's transmitted HDLC data frames
(for control signalling).
Same options as +FRH
Specifies the modulation mode, training time, and data
rate for transmitted fax data without HDLC framing.
Same options as +FRH
Transmit silence for specified time.
n = ms. Stops transmission, waits for the specified time,
then responds to the DTE with the "OK" result code.

Configuration Commands

Flow Control
Selects the computer/modem flow control method.
None
XON/XOFF
RTS/CTS
Serial Port Rate
Selects the computer/modem serial port rate. This
parameter has no effect when +FCLASS=0.
2400 BPS
4800 BPS
7200 BPS
9600 BPS
12.0 KBPS
14.4 KBPS
16.8 KBPS
19.2 KBPS
Description
C-3

Advertisement

   Also See for Motorola 3460 Fast'R

   Related Manuals for Motorola 3460 Fast'R

This manual also for:

3460 fast'r plus

Comments to this Manuals

Symbols: 0
Latest comments: