Service Specifications - Toyota 2003 Land Cruiser Owner's Manual

Service specifications

ENGINE
Valve clearance (engine cold), mm (in.):
Intake 0.15—0.25 (0.006—0.010)
Exhaust 0.25—0.35 (0.010—0.014)
Spark plug type:
DENSO SK20R11
NGK IFR6A11
Spark plug gap, mm (in.):
1.1 (0.043)
ENGINE LUBRICATION
Oil capacity (drain and refill), L (qt., Imp.
qt.)
With filter 6.8 (7.2, 6.0)
Without filter 6.4 (6.8, 5.6)
Oil grade:
"Toyota Genuine Motor Oil" is filled in
your Toyota vehicle. Use Toyota ap-
proved "Toyota Genuine Motor Oil" or
equivalent to satisfy the following grade
and viscosity.
Oil grade:
API grade, SL "Energy–Conserving" or
ILSAC multigrade engine oil.
Recommended oil viscosity:
SAE 5W–30
Temperature range anticipated before next oil
change
Please contact your Toyota dealer for fur-
ther details.
'03 L/C U (L/O 0301)
COOLING SYSTEM
Total capacity, L (qt., Imp. qt.)
Without rear heater 14.7 (15.5, 12.9)
With rear heater 15.4 (16.3, 13.6)
Coolant type:
"Toyota Genuine Long Life Coolant" is filled
in your Toyota vehicle. In order to avoid
technical problems, we strongly recom-
mend using "Toyota Genuine Long Life
Coolant" or equivalent.
Please contact your Toyota dealer for fur-
ther details.
With ethylene–glycol type coolant for prop-
er corrosion protection of aluminum com-
ponents
Do not use alcohol type antifreeze or plain
water alone.
BATTERY
∗
Open voltage at 20_C (68_F):
12.6—12.8 V Fully charged
12.2—12.4 V Half charged
11.8—12.0 V Discharged
∗
: Voltage that is checked 20 minutes af-
ter the key is removed with all the lights
turned off
Charging rates:
5 A max.
295