Glove Box; Garage Door Opener - Toyota 2003 Land Cruiser Owner's Manual

Glove box

To use the glove box, do this.
To open: Pull the lever.
With the instrument panel lights on, the
glove box light will come on when the
glove box is open.
To lock: Insert the master key and turn it
clockwise.
CAUTION
To reduce the chance of injury in
case of an accident or a sudden stop,
always keep the glove box
closed while driving.
180

Garage door opener

The garage door opener (HomeLink
Universal Transceiver) is manufactured un-
der license from HomeLink
programmed to operate
gates, entry doors, door locks, home light-
ing systems, and security systems, etc.
(a) Programming the HomeLink
R
The HomeLink in your vehicle has 3
buttons and you can store one program
for each button.
To ensure correct programming into the
R
HomeLink , install a new battery in the
hand–held transmitter prior to program-
door
ming.
'03 L/C U (L/O 0301)
The battery side of the hand–held trans-
mitter must be pointed away from the
Buttons
R
HomeLink during the programming pro-
Indicator
cess.
light
For Canadian users, follow the procedure
in "Programming an entrance gate/Pro-
gramming all devices in the Canadian
market".
1. Decide which of 3 HomeLink
you want to program. Push and hold
down one of the buttons until the indi-
cator corresponding to
channel begins to flash.
R
2. Place your hand–held garage transmit-
ter 25 to 75 mm (1 to 3 in.) away from
R
and can be
the surface of the HomeLink
garage doors,
Keep the
R
HomeLink
R 3. Simultaneously
hand–held
along with the selected HomeLink
ton.
4. When the indicator light on the Home-
R
Link changes from a slow to a rapid
flash after 20 seconds, you can release
both buttons.
R
buttons
the selected
R
.
indicator light on the
in view while programming.
press and hold the
garage transmitter button
R
but-