Toyota 2006 Land Cruiser Owner's Manual page 349

2. Left- hand headlight and right- hand
head light (high beam):
Turn the bulb base counterclockwise
to the front of the vehicle.
Right- hand headlight (low beam):
Turn the bulb base clockwise to the
front of the vehicle.
3. Pull the bulb out of the bulb base.
If the connector is tight, wiggle it.
4. Left- hand headlight and right- hand
headlight (high beam):
Install the bulb base by turning it
clockwise to the front of the vehicle.
Right- hand headlight (low beam):
Install the bulb base by turning it
counterclockwise to the front of the
vehicle.
Left- hand haedlight: Remove
washer inlet.
Aiming is not necessary after replacing
the bulb. When aiming adjustment is nec-
essary, contact your Toyota dealer.
the
335