Is Recommended - Toyota 2006 Land Cruiser Owner's Manual

"AUTO" button
For automatic operation of the air condi-
tioning, press the "AUTO" button. An indi-
cator light will illuminate to show that the
automatic operation mode has been se-
lected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed and air flow according to the tem-
perature.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, press
the "MODE" or fan speed control button.
Fan speed control button
Push the " " (increase) or " " (decrease)
button to adjust the fan speed.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode.
Temperature selector knob
To increase the temperature, turn the knob
to right side, to decrease it, turn the knob
to left side.
"MAX COLD" appears when you adjust to
maximum cooling, and "MAX HOT" ap-
pears when you adjust to maximum warm-
ing.
"OFF" button
Push the button to turn off the air condi-
tioning system.
"MODE" button
Push the button to select the vents used
for air flow.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. Panel—Air flows mainly
instrument panel vents.
2. Bi- level—Air flows from both the floor
vents and the instrument panel vents.
3. Floor—Air flows mainly from the floor
vents.
It is recommended that you close the
lower vent. For details about this, see
"Instrument panel vents" described be-
low.
from the
191