Toyota 2006 Land Cruiser Owner's Manual page 187

Hide thumbs Also See for 2006 Land Cruiser:
Table of Contents

Advertisement

1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station (see "AUDIO- TUNE"
knob or "SEEK TRACK" button). Push and
hold down the button until you hear a
beep—this will set the station to the but-
ton. The button number will appear on the
display.
To tune in to a preset station: Push the
button for the station you want. The but-
ton number and station frequency will ap-
pear on the display.
These systems can store one AM and two
FM stations for each button (The display
will show "AM", "FM1" or "FM2" when you
push "AM·SAT" or "FM" button).
XM satellite radio*—
These buttons are used to preset and
tune in radio channels.
To preset a channel to a button: Tune in
the desired channel. (See "AUDIO- TUNE"
or "SEEK TRACK".) Push and hold down
the button until you hear a beep—this will
set the channel to the button. The preset
button number will appear on the display.
To recall a preset channel: Push the but-
ton for the channel you want. The preset
button number and channel number will
appear on the display.
This radio can store three XM channels
for each button. (The display will show
"SAT1", "SAT2" or "SAT3" when you push
"AM·SAT" button
*: Use of satellite radio requires XM tuner
and service. Contact your Toyota dealer
for details.
(Eject button)
Cassette tape
Push the cassette tape eject button to
eject a cassette.
Compact disc
To eject one compact disc only: Push and
release the compact disc eject button. If
you hold the button too long (if the audio
system is on at this time, you hear a
beep.), the mechanism will change to the
mode for ejecting all the discs loaded in
the changer. You can also eject any spe-
cific one of the discs loaded in the player
as follows:
1. Push either side of the " DISC "
button until the number of the disc you
want to eject is displayed.
2. Push and release the compact disc
eject button.
To eject all the discs loaded in the player:
Push and hold the compact disc eject but-
ton (until you hear a beep when the audio
system is on). The last compact disc
played before pushing the button will be
ejected first. If a disc is left in the slot
for a long time, the function to eject all
the discs will be automatically cancelled.
(Program)
Push "
" to select the other side of a
cassette tape. The display indicates which
side is currently selected ("
" indicates
top side, "
" indicates bottom side).
Auto- reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
173

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents