Ferroli optima 2001 VMF7 Installation Instructions Manual page 29

g) Base Plate
Remove the four fixing screws (fig. 16).
h) Side Panels
For each panel, remove two fixing screws at base of appliance and single fixing screw at top of appliance (fig. 30).
Also remove hinged control panel cover.
Note - The panels are located in keyhole slots, push panels upwards and pull away.
i) Removal of Combustion Chamber Outer Cover
Remove the five combustion chamber outer cover fixing screws and undo four buckle clips (fig. 30) to remove cover.
j) To Remove Control Panel
Hinge control panel cover downwards.
The two control panel securing screws can now be removed (fig. 30), remove C/H and D.H.W. thermostat knobs hinge control
panel forwards and disengage from bottom lugs, the control panel can now be removed.
k) To lower control box frame
Remove screw securing gas control valve to frame.
Remove the base plate (g) above.
Remove the two screws securing the frame to the back panel.
Electric box support
fixing screws
Side panel / base plate
fixing screws
Side panel fixing screws
Gas valve fixing screw
Electric box cover
2001
Fasteners
(buckle clips)
Combustion chamber
outer cover fixing screws
Fasteners
(buckle clips)
fixing screws
Control panel
fixing screw
Fig. 30
29