Saving A Pattern; Pattern Utility - Roland JUNO-DS Owner's Manual

Saving a Pattern

A pattern that you create will be lost if you select a different pattern or if you power-
off the JUNO-DS.
When you've created a pattern that you like, you should save it.
1.
While the PATTERN SEQUENCER screen is shown, press the [WRITE] button.
The PATTERN NAME screen appears.
2.
Enter the pattern name.
MEMO
For more about entering a name, refer to "Saving Your Settings (Write)" (p. 10).
3.
When you've specified the pattern name, press the [ENTER] button.
The PATTERN WRITE screen appears.
4.
Use the value dial to select the save-destination.
NOTE
If you save to a number that already contains data, the pattern is overwritten and
the previous data is erased.
5.
Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
6.
Press the [ENTER] button to save the pattern.
Saving is complete when the screen indicates "Completed!"
NOTE
Never turn off the power while the screen indicates "Writing.... "

Pattern Utility

1.
While the PATTERN SEQUENCER screen is shown, press the [MENU] button.
The MENU screen appears.
2.
Move the cursor to category number, and press the [ENTER] button.
The PATTERN UTILITY screen appears.
MEMO
While the PATTERN SEQUENCER screen is shown, you can hold down the [SHIFT]
button and press the [PATTERN SEQUENCER] button to access the PATTERN
UTILITY screen.
3.
Move the cursor to the function that you want to execute, and press the
[ENTER] button.
Copying a Pattern (PATTERN COPY)
Here's how you can copy from a different pattern to the specified track of the
currently selected pattern.
1.
In the PATTERN UTILITY screen, select "PATTERN COPY" and press the
[ENTER] button.
The PATTERN COPY screen appears.
2.
Set the parameters.
Parameter Value/Explanation
Selects the copy-source pattern bank.
Pattern bank
TEMP, PRST, USER
Selects the copy-source pattern.
Pattern number
001–032 (PRST), 001–128 (USER)
Selects the copy-source track.
Source Pattern
Track
TRACK ALL, TRACK 1–8
Selects the copy-destination track.
Destination
Pattern Track
TRACK ALL, TRACK 1–8
Selects the content to be copied.
ALL
Copy Target
SOUND ONLY
PATTERN ONLY
3.
Press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
The pattern and sound settings are copied.
Only the sound settings sre copied.
Only the pattern is copied.
Playing/Recording Patterns (PATTERN SEQUENCER)
Initializing a Pattern (PATTERN INIT)
1.
In the PATTERN UTILITY screen, select "PATTERN INIT" and press the [ENTER]
button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
2.
Press the [ENTER] button to initialize the pattern.
Importing Pattern Data from SMF (SMF IMPORT)
Imports the specified SMF into the temporary area.
* Bank select and program change data is not imported.
5 When you import, the current state of the temporary area is discarded.
5 The SMF that you want to import must be saved in the IMPORT folder of the USB
flash drive.
SMF data that can be imported:
5 Only SMF format 0 is supported.
5 Only the tracks (parts) used by the JUNO-DS are imported.
5 The first eight measures of SMF data can be imported. Subsequent data is not
imported.
1.
In the PATTERN UTILITY screen, select "SMF IMPORT" and press the [ENTER]
button.
The SMF IMPORT screen appears.
2.
Select the SMF that you want to import.
MEMO
In the SMF IMPORT screen, you can press the [s] button to audition the
selected SMF.
3.
Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
4.
Press the [ENTER] button to import the SMF.
Exporting a Pattern to SMF (SMF EXPORT)
A pattern in the temporary area can be given a name and exported as SMF data.
5 Preset patterns cannot be exported.
5 The exported SMF is saved in the "EXPORT" folder of the USB flash drive.
1.
In the PATTERN UTILITY screen, select "SMF EXPORT" and press the [ENTER]
button.
The SMF EXPORT screen appears.
2.
Enter a file name.
3.
Press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
4.
Press the [ENTER] button to export the pattern.
15