Usb-Dac - Pioneer Elite SC-89 Operating Instructions Manual

13
Symptom Cause
This unit cannot be —
selected from the Spotify
application.
The sound of the Spotify —
audio stream is not pro-
duced.
With an AV receiver that has the
'System Setup' d 'Other Setup' d
'Play ZONE Setup' option, the sound
may be playing in another zone.
This unit's volume does not A volume upper limit is provided so
increase when the volume that the volume will not inadvertently
slider in the Spotify applica- go up too much.
tion is raised.
Playback continues on The Spotify audio stream continues
this unit when the Spotify from this unit, even when the Spotify
application is quit. application is quit.
The Network functions The remote control is not currently
cannot be operated with set to the Network function mode.
the buttons on the remote
control.
When DMR mode or Air- Play ZONE Setup is not set to
Play is used from a com- MAIN.
puter, smartphone, etc., the
sound is played in subzone.
AirPlay or DMR mode can- When USB-DAC input is selected
not be used for subzone. for any of sub zones, AirPlay and
DMR mode cannot be used for other
sub zone.
Network connections —
cannot be made via the
wireless LAN converter
(AS-WL300).
Remedy
An Internet connection is required for both the mobile
digital device and this unit.
Connect the mobile digital device by Wi-Fi to the wireless
LAN router of the same network as the one to which this
unit is connected.
A Spotify Premium account (for a charge) must be regis-
tered on the Spotify application.
When this unit is in standby, it cannot be selected from the
Spotify application.
Check whether this unit is selected on the Spotify applica-
tion.
Check that contents are playing on the Spotify application.
If the above does not solve the problem, turn this unit's
power off then back on.
If this is the case, set which zone the sound is to be played
in at the play zone settings.
To further increase the volume, use the remote control.
When the iControlAV5 or built-in AVNavigator application
is being used, you can use the application to increase the
volume.
To operate again, relaunch the Spotify application.
Press NET to set the remote control to the Network func-
tion mode (page 71 ).
Change Play ZONE Setup to MAIN (page 113 ).
Switch the sub-zone in which the USB-DAC input is
selected to a different input.
For details, see Wireless LAN on page 125 .

USB-DAC

SC-89 only
Symptoms Causes
When the USB-DAC IN Has the proper device driver been
terminal is connected to installed on the PC?
a PC via USB cable, audio
files on the PC cannot be
played.
No sound is produced when Are volume settings correct for the
attempting to play files on OS and application program?
a PC.
Is the OS audio output set to MUTE?
Are multiple applications running
simultaneously?
Are volume settings correct for the
OS and application program?
High sound quality files The exclusive driver is not installed
(over 48 kHz/24 bits) cannot on the computer.
be played.
124
FAQ
Remedies
When using a USB cable to connect the unit's USB-DAC
IN terminal to a PC in order to play audio files on the PC,
the proper device driver must be downloaded from the sup-
plied CD-ROM and installed on your PC.
Raise the volume settings as required.
Cancel the MUTE setting.
Try closing applications that are not in use.
For audio device select "Pioneer USB Audio Device".
Install the driver software on the computer from the
included CD-ROM.