Pioneer Elite SC-89 Operating Instructions Manual page 63

05
Listening to music contents of a Bluetooth wireless technology device with
your system
1 Press BT ADPT on the remote control to switch the receiver to ADAPTER PORT input.
2 From the Bluetooth wireless technology device, perform the operation to connect to the
Bluetooth ADAPTER.
! When the Bluetooth ADAPTER is not plugged into the ADAPTER PORT, No Adapter will be displayed if
ADAPTER PORT input is selected.
3 Start playback of music contents stored on the Bluetooth wireless technology device.
This receiver's remote control buttons can be used for basic playback of files stored on Bluetooth wireless tech-
nology devices.
! Bluetooth wireless technology device should be compatible with AVRCP profile.
! Depending on the Bluetooth wireless technology device you use, operation may differ from what is shown in
the remote control buttons.
4 While listening to a source, set the remote control to the receiver operation mode, then
press ADV repeatedly to select SOUND RETRIEVER AIR.
Notes
! The Bluetooth ®
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of
their respective owners.
! With this receiver, when an iPod is connected or disconnected while the music of a Bluetooth wireless technol-
ogy device is playing, the connection with the Bluetooth wireless technology device may be canceled.
! The SOUND RETRIEVER AIR listening mode can only be selected when the ADAPTER PORT input.
63
Basic playback