Samsung SCD-5083R User Manual page 24

camera operation
y WDr : When there are both bright and dark areas at the same time, this mode makes
both areas distinctive.
- LEVEL : Select one from low,
med, high to adjust the
brightness of the WDR
setup.
- RETURN : Return to the MAIN SETUP menu.
M `
In WDR mode, the max/min shutter value is set to 1/2 to 1/480.
`
In WDR mode, there can be noise between a bright and dark area.
`
Depending on light conditions, unnatural changes or symptoms can occur on the screen so
deactivate the user mode.
24_ camera operation
▶ 1.
<WDR ON>
WDR SETUP
LEVEL
RETURN
2.
<WDR OFF>
MIDDLE