Checking And Replacing Tires - Toyota 2007 Highlander Owner's Manual

High tire pressure (overinfla-
tion)—
D Poor handling
D Excessive wear
D Uneven wear
D A greater possibility of tire
damage from road hazards
'07 HIGHLANDER HV_U (L/O 0608)

Checking and replacing tires

Tread wear indicator
CHECKING YOUR TIRES
Check the tire's tread for tread
wear indicators. If the indicators
show, replace the tires. The loca-
tion of tread wear indicators is
∆
shown by the "TWI" or " " marks,
etc., molded on the sidewall of
each tire.
The tires on your Toyota have built−in
tread wear indicators to help you
know when the tires need replace-
ment. When the tread depth wears to
1.6 mm (0.06 in.) or less, the indica-
tors will appear. If you can see the
indicators in two or more adjacent
grooves, the tire should be replaced.
The lower the tread, the higher the
risk of skidding.
Depending on driving conditions, your
tires may wear more rapidly than
those of conventional vehicles.
The effectiveness of snow tires is
lost if the tread wears down below
4 mm (0.16 in.).
If you have tire damage such as
cuts, splits, cracks deep enough to
expose the fabric, or bulges indi-
cating internal damage, the tire
should be replaced.
If a tire often goes flat or cannot be
properly repaired due to the size or
location of a cut or other damage, it
should be replaced. If you are not
sure, consult with your Toyota dealer.
2007 HIGHLANDER HV from July '06 Prod. (OM48685U)
393