Toyota 2007 Highlander Owner's Manual page 131

2. Widen the gap between the seat
cushion and seatback slightly and
confirm the position of the lower an-
chorages near the button on the
seatback.
3. Type A—Latch the hooks of lower
straps onto the anchorages
tighten the lower straps.
Type B—Latch the buckles onto the
anchorages.
For owners in Canada—The symbol on
a child restraint system indicates the pres-
ence of a lower connector system.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 115 in this Section.)
For installation details, refer to the instruc-
tion manual equipped with each product.
'07 HIGHLANDER HV_U (L/O 0608)
CAUTION
When using the lower anchorages
D
for the child restraint system, be
sure that there are no irregular ob-
jects around the anchorages or that
and
the seat belt is not caught.
Push and pull the child restraint
D
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
When using the lower anchorages
D
for the child restraint system, en-
sure that the seat is moved to the
rear−most position, with the seat-
back close to the child restraint
system.
After securing the child restraint
D
system, never slide or recline the
seat.
Do not install a child restraint sys-
D
tem on the second seat if it inter-
feres with the lock mechanism of
the front seats. Otherwise, the child
or front seat occupant(s) may be
killed or seriously injured in case
of sudden braking or a collision.
2007 HIGHLANDER HV from July '06 Prod. (OM48685U)
119