Unpacking And Getting Ready - Kenwood KEN CJSS32 Instruction Booklet

Unpacking
This microwave oven is
designed for home use. It
should not be used for
commercial catering.
4

Unpacking and getting ready

1
After unpacking your oven, check that it has not been damaged whilst in
the box. Make sure there are no dents on the oven, and the door closes
properly and without damages. A dented or damaged oven could allow
microwave energy to escape.
Make sure that you have taken all the packaging from inside the oven.
2
Choose a flat work surface for your microwave away from heat sources
such as radiators or fires, and away from anywhere that is very cold.
You should allow a 10cm space all around the oven and
30cm above so that warm air can escape from the
vents during cooking – it is not designed to be built in.
3
Plug your oven into a standard household electrical socket
(240 volt, 13 amp rated).
Avoid using a socket that also has an adaptor and other equipment
plugged in. Do not use a multi adaptor.
4
Put the turntable ring inside the oven and place the glass turntable on
top of the ring. The turntable is shaped to sit securely on the spindle.
You must always use the turntable and ring whenever you use the
microwave.
30 cm
10 cm 10 cm