Pre-Set Function - Kenwood KEN CJSS32 Instruction Booklet

Pre-set Function

1 Set the clock first. (Consult the instruction of clock setting.)
2
Input the cooking program. Three stages can be set at most. Defrosting should not
be set in preset function.Auto menu can be set single stage only.
Example: If you want to cook with 80% microwave power for 7 minutes.
a. Press "Microwave" once;
b. Turn "Time/Weight/Auto Menu" to choose 80% microwave power till "P80" display;
c. Press "Start/+30Sec./Confirm" to confirm;
d. Turn "Time/Weight/Auto Menu" to adjust the cooking time of 7 minutes;
After the above steps, please do not press "Start/+30Sec./Confirm". Then do as following:
3
Press "Pre-Set", current time displays and the hour figures flash.
4
Turn "Time/Weight/Auto Menu" to adjust the hour figures, the input time should
be within 0--23(24-hour) or 1--12(12-hour).
5
Press "Pre-Set", the minute figures will flash.
6
Turn "Time/Weight/Auto Menu" to adjust the minute figures, the input time should
be within 0--59.
7
Press "Start/+30Sec./Confirm" to finish setting. ":" will light, buzzer will ring twice
when the time arrives, then cooking will start automatically.
Note: Clock must be set first. Otherwise, pre-set function will not work.
Microwave cooking
19