Descaling" Programme - Melitta Caffeo Barista TS Operating Instructions Manual

Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Coffee system cleaning menu.
3. Use the arrow buttons to select Start and confirm with "menu/ok".
4. Follow the further instructions on the display up to the end of the clean-
ing programme.
» The ready symbol appears on the display.
9.7

"Descaling" programme

The descaling programme is used to remove limescale deposits in the inte-
rior of the appliance with coffee machine descaling agents.
To avoid damage to the appliance, we recommend carrying out the descal-
ing programme every 3 months or as requested by the appliance.
The descaling programme takes approximately 25 minutes and should not
be interrupted.
CAUTION
Contact with descaling agent may lead to eye and skin irritation.
Observe the processing instructions on the packaging of the descaling
ƒ
agent.
ATTENTION
The use of unsuitable descaling agents can damage the appliance.
Only use Melitta® ANTI CALC Espresso Machines liquid descaling agent.
ƒ
ATTENTION
A water filter may be damaged if it is screwed in during the descaling
programme.
Remove the water filter when the appliance requests you to do so
ƒ
(see Fig. 25 Screwing/Unscrewing the water filter on page 97).
Place the water filter into a vessel filled with tap water during the desca-
ƒ
ling programme.
The water filter can be reinserted and reused when the descaling pro-
ƒ
gramme is complete.
Care and maintenance
95