Delay Start Cooking (Program Set In Advance) - Kenwood KEN GJSS25A Instruction Manual

delay start cooking (program set in advance)

For Delay Start Cooking, follow the steps below.
For instance: The current time is 12 o'clock (noon) and you want to cook with 80% micro-
wave power for 5 minutes after 1 hour 30 minutes.
NOTE: You can only set 3 stages for
Delay Start Cooking. Both Defrost and
Auto Menu cooking programs cannot be
set as one of those stages. Ensure the
oven door is closed prior to setting the
program.
1. Press the micro./grill/combi. button once
and the LCD display will show P100. Turn
the timer/power/weight dial until the LCD
display shows P80.
2. Press the micro./grill/combi. button
again to confirm the power setting. Turn the
timer/power/weight dial to adjust the
cooking time until the LCD display shows
5:00.
ATTENTION: Do not press the start
button to confirm and start cook-
ing at this point.
3. a Press the clock/pre-set button to
preset the starting time for the cooking. The
hour figure will flash first.
b Turn the timer/power/weight
dial to adjust the starting time until the LCD
display shows 13:00
4. a Press the clock/pre-set button to
preset the starting time for the cooking. The
minute figure will flash first.
b Turn the timer/power/weight
dial to adjust the starting time until the LCD
display shows 13:30
5. Press the start button to
complete the setting. The microwave oven
will sound when the count down reaches the
starting time and cooking will start automati-
cally.
# The examples shown are based on 24-hour system.
#
.
#
.
1
2
5
1
2
3b
4b
1
2
3b
4b
3a
4a
GB-23