Delay Start Cooking (Program Set In Advance) - Kenwood ken stal25a Manual

delay start cooking (program set in advance)

For Delay Start Cooking, follow the steps below.
For instance: The current time is 12 o'clock (noon) and you want to cook with 80% micro-
wave power for 5 minutes after 1 hour 30 minutes.
NOTE: You can only set 2 stages for
Delay Start Cooking. Defrost cannot be
set as one of those stages. Ensure the
oven door is closed prior to setting the
program.
1. Press the microwave button once and
the LED display will show P100. Press the
button again to change the microwave power
level to P80.
2. Press the auto menu cooking/number
buttons (1-0) to enter the cooking time
until the LED display shows 5:00.
ATTENTION: Do not press the start/
express cook button to
confirm and start cooking at this
point.
3. a Press the clock/pre-set button to
preset the starting time for the cooking.
The hour figure will flash first.
b Press the auto menu cooking/number
buttons (1-0) to enter the cooking until
until the LED display shows 13:00.
4. a Press the clock/pre-set button to
preset the starting time for the cooking.
The minute figure will flash first.
b Press the auto menu cooking/number
buttons (1-0) to enter the cooking until
until the LED display shows 13:30.
5. Press the start/express cook button to
complete the setting. The microwave oven
will sound when the count down reaches the
starting time and cooking will start automati-
cally.
6. Press the stop/clear button to stop the
cooking and cancel the setting.
1
2
3
4
3a
4a
2
3b
4b
1
3
6
5
GB-21