Delay Start Cooking (Program Set In Advance) - Kenwood KCJS28 Operating Instructions Manual

delay start cooking (program set in advance)

For Delay Start Cooking, set the clock first and follow the steps below.
For instance: The current time is 12 o'clock (noon) and you want to cook with 80% micro-
wave power for 5 minutes after 1 hour 30 minutes.
NOTE: You can set a maximum of 3 stages
for Delay Start Cooking. Defrost
cannot be set as one of those
stages. Auto Menu Cooking can only
be set as a single stage. Ensure the
oven door is closed prior to setting
the program.
1. Press the microwave button once and
the LED display will show P100. Press
the button again to change the micro-
wave power level to P80.
NOTE: Alternatively, after you press the
microwave button once, you
can turn the timer/weight/auto
menu dial to change the power
level to P80 as well.
2. a Press the start/+30sec/confirm
button to confirm the microwave
power level.
b Turn the timer/weight/auto menu
dial to adjust the cooking time until the
LED display shows 5:00.
ATTENTION: Do not press the start/
+30sec/confirm button to
confirm and start cooking at
this point.
3. a Press the clock/pre-set button to
preset the starting time for the cooking.
The hour figure will flash first.
b Turn the timer/weight/auto menu
dial to adjust the starting time until the
LED display shows 13:00.
4. a Press the clock/pre-set button to preset the starting time for the cooking.
The minute figure will flash.
b Turn the timer/weight/auto menu dial to adjust the starting time until the LED
display shows 13:30.
5. Press the start/+30sec/confirm button to complete the setting. The microwave
oven will sound when the count down reaches the starting time and cooking will
start automatically.
1 , 2b
3b , 4b
1
microwave
grill/combi
convection
defrost
3a , 4a
clock/pre-set
2b , 3b
4b
stop/clear
2a , 5
start/+30sec/
con rm
25