Interactive Cab Install; Autostart.ini - Datalogic Skorpio X3 User Manual

USE AND FUNCTIONING
4.14.3

Interactive CAB Install

−
If the CAB installer requires user interaction that must be performed
during the AutoStart CAB installation process, you can specify a special
file name to disable the silent mode installation. If this mode is specified,
the CAB file will be installed with
arguments specified.
An example of what AutoStart would execute is:
\Windows\Wceload.exe <cab file>
To force this mode of installation via AutoStart, rename the CAB file to include a '_'
character before the ".cab" extension of the file.
Example:
"File.cab"
install the CAB in silent mode. This specially-named CAB file should be placed in the
AutoStart folder with other CAB files intended for installation on the next reboot.
4.14.4

Autostart.ini

A file named 'PreAuto.ini' can also be created in addition to or
instead of Autostart.ini. PreAuto.ini is executed before CAB files in
the \Cab folder are installed. Autostart.ini is executed after CAB files
in the \Cab folder are installed. The format for the PreAuto.ini is
NOTE
identical to that of Autostart.ini.."
Autostart.ini is a text file that AutoStart will run upon startup of the Skorpio X3, and
after any CAB files are installed. This file should be placed in the \root folder.
AutoStart will run the Autostart.ini file on each reboot of the device.
Line Formatting
Each line of the
executable, and any command line arguments.
< Autostart option(s)> <full path to executable>
<command line arguments>
Sample:
- \windows\pword.exe \file.doc
should be renamed
Autostart.ini
without any command line
Wceload
"File_.cab"
can consist of Autostart options, an
to force AutoStart to not
4
117