setup screen
Storage
You can activate recording on your device, set the recording conditions, check the saved
data capacity and format the device itself.
1. From the Setup menu, select the
<event (
2. Click <Storage>.
3. Select a device to save data in.
If your device is properly recording data, it
M
`
will display "Recording".
If you see an "Error" message, check the
`
following:
-
Check the storage to see if it is
connected to the device.
-
Check the files in the storage to see if
they are damaged.
-
Check the storage to see if they are
physically damaged.
If the "Error" message does not disappear after following the instructions, format the SD card.
`
After formatting, if the error message still remains, replace the SD card.
If you remove the SD card without changing a button to 'off' position in settings or if you connect
`
a camera to an unstable power source, the SD card may be damaged.
114_ setup screen
)> tab.