Samsung SNP-L5233H User Manual page 106

setup screen
ip filtering
You can create a list of IPs that you want to grant or deny access to them.
1. From the Setup menu, select the
<network (
2. Click <ip filtering>.
3. Select <filtering type>.
• Deny : If selecting this, access from
those IPs that are added to the
filtering will be restricted.
• Allow : If selecting this, access from
only those IPs that are added to the
filtering will be accepted.
4. Click the [add (
The IP list will be created.
5. Provide the IP that you want to grant or deny access from.
When you enter an IP address and a Prefix, the list of IP addresses available will
appear in the right-side filter range column.
If selected <Allow> for IP Filtering and <IPv6 setup> of <IP & Port> is set to <Use>, both IPv4
M `
and IPv6 addresses of the computer currently configuring should be assigned.
The IP address of the computer used for the current setup cannot be added to <Deny>, it should
`
be added to <Allow>.
Only the IP addresses that are set to <Use> will be displayed in the filter column.
`
6. Select an IP to delete from the list.
Click the [Delete (
7. When done, click [apply (
106_ setup screen
)> tab.
)] button.
)] button.
)].