Battery Low; Paging The Cordless Handset; Intercom Operation; Answering An Intercom Call - RCA H5400 User Manual

Telephone Operation

Battery Low

If the handset battery is low, the unit will emit the alert tone and show BATTERY LOW in the display to remind you that the battery needs
charging. If the battery voltage is very low, the handset will automatically shut down. Place handset in the charge cradle to recharge battery.
Paging All Extension from the Cordless Handset
In the standby mode, press the INT button and then press zero (0) button twice to activate page all extensions function.

Paging the Cordless Handset

This feature helps you locate a misplaced handset.
Press the PAGE button once on the base, then press number 0 button. The cordless handset will beep continuously (if it is not out of range)
for 2 minutes or until you press any button on the handset.
NOTE: You may still page the cordless handset even if the ringer is turned off.

Intercom Operation

Answering an Intercom Call

1. Press the INTERCOM button or TALK button.
2. When finished, press the INTERCOM button or TALK button again.
Receiving an Incoming Telephone Call During an Intercom Call
During an intercom call, if you receive a telephone call, you will hear an alert tone. To answer the incoming call, press the HOLD button to
place your intercom call on hold or press TALK or INT button to drop the intercom call, then press TALK to answer the telephone call.
Using Intercom with a Telephone Call
During a telephone call, you can use the intercom function to page another extension unit and set up a private (2-way) intercom
conversation with another user while the telephone call is placed on hold. Or, you can create a 3-way conversation between the telephone
caller, the cordless handset and other extensions.

Two-Way Intercom Calls

1. To make an intercom call, first press the HOLD button to place the external call on hold. Then, press the INT button, and followed by the
extension ID number.
2. To answer the intercom call, press HOLD to place the current call on hold. Then press INT or TALK button to answer the intercom call.
When finished, press INT or TALK button to end the intercom call. Press HOLD button to retrieve the external caller.

Three-Way Intercom Calls

1. Press HOLD button to hold the current line.
2. Press INT button, followed by the extension ID number.
3. Wait for the reply of extension you selected.
4. Once the extension replies, press the CONF button to set up three-way conference.
5. When finished, press the TALK button once.
Making an Intercom Call with Other Extensions
1. Make sure the phone is OFF (not in TALK mode).
2. Press the INT button, and SELECT PHONE ID is displayed.
3. Press the number button to input the phone ID you want to intercom with. For example, to intercom with extension 2, you need to
input "0", "2".
4. When finished, press the INT or TALK button to end the intercom call.
NOTE: To cancel the intercom call, press INTERCOM.

Memory

The cordless handset and base each have their own separate memory storage areas. The handset can store forty phonebook records
consisting of 21-character names and 32-digit telephone numbers.
Storing a Name and Number in Memory
1. Press the STORE button on the handset, ENTER NUMBER is displayed.
2. Use the keypad to enter the phone number (up to 32 digits).
8