4.3.2
Scan
▷
Live TV/Radio ▶ MENU ▶ Installation ▶ Scan
Satellite Scan
Performs a channel scan for a freely selectable satellite. Search mode and Network search
can be set for this purpose:
The type of channels to be scanned (all channels, free-to-air (FTA) channels,
Scan Mode
HD channels etc.).
The scan for additional transponders that can be found by networking the
Network Search
transponders.
Perform a satellite scan
1. In the Scan menu, highlight the item Satellite Scan using P+/−, then press OK.
➯ The Multi-SAT Search window appears (Fig. 12, P. 24).
2. Highlight a satellite ① using P+/−, then press OK.
➯ The satellite is marked with a tick ②.
3. If required, repeat step 2 for further satellites.
4. Press AUDIO.
➯ The Scan dialogue appears.
5. If required, change Scan mode and Network Search using VOL+/− and P+/−.
6. Press OK.
➯ The WARNING dialogue appears.
7. If required, use VOL+/− to select the value Yes.
8. Press OK.
➯ The Searching window appears with a list of the TV channels found and radio channels
found. The lists are continually updated.
➯ If required, press EXIT to break off the search.
9. After the search has been completed, the Searching window closes automatically.
23 of 40
23 of 40