Kubota M6040 NARROW Workshop Manual page 117

M6040, M7040Narrow, WSM
1. PARKING BRAKE
[1] STRUCTURE
(1) ROPS Model
(1) Brake Plate
(2) Brake Disc
(3) Steel Plate
(4) Cam Plate
• The parking brake is a mechanical type which is designed to actuate the traveling brakes.
When operate the parking hand brake lever (9), the cam plate (4) rotates by the link mechanical and the brake
cam lever (11) and (14). At the same time, the cam plate (4) moves to the steel plate (3) with the ball (7) and
depresses the brake discs (2) and brake plates (1) to brake the brake shaft (6).
The parking cable lever (10) automatically adjust the operating forces for both R.H. and L.H. side of parking cable
(12) and (13).
• While the machine is parked with the engine off, the hydraulic 4WD clutch is kept disengaged. But the clutch disc
is held pressed by the spring, which means that the 4WD mechanism is still on. When the parking brake is applied,
therefore, all the 4-wheels are put on brakes to provide for greater braking effect.
(5) Brake Piston
(6) Brake Shaft
(7) Ball
(8) Brake Cam
(9) Parking Hand Brake
(10) Parking Cable Lever
N5-M1
BRAKES
(11) Brake Cam Lever L.H.
(12) Parking Cable L.H.
(13) Parking Cable R.H.
(14) Brake Cam Lever R.H.
9Y1210220BRM0001US0
KiSC issued 07, 2012 A