4Wd / Bi-Speed Turn Clutch; Removing 4Wd / Bi-Speed Turn Clutch - Kubota M6040 NARROW Workshop Manual

M6040, M7040Narrow, WSM

[4] 4WD / BI-SPEED TURN CLUTCH

(1) Removing 4WD / Bi-speed Turn Clutch

4WD / Bi-speed Turn Clutch
1. Draw out the 4WD / Bi-speed turn clutch (1) and Bi-speed turn
gear and shaft assembly (2).
(When reassembling)
• Replace the seal rings (3) with new one.
• Apply grease to the seal rings (3) when assembling.
(1) 4WD / Bi-speed Turn Clutch
(2) Bi-speed Turn Gear and Shaft
Assembly
Clutch Holder
1. Draw out the three pipes (5) using the M6 × P1.0 screw (6) as
shown photo.
2. Remove the clutch holder (7).
(When reassembling)
• Apply oil to the O-rings (4).
(1) Hydraulic Pipe (2WD)
(2) Hydraulic Pipe (4WD)
(3) Hydraulic Pipe (Bi-speed Turn)
(4) O-ring
N3-S11
TRANSMISSION
(3) Seal Ring
9Y1210220TRS0014US0
(5) Bi-speed Turn Pipe
(6) M6 × P1.0 Screw
(7) Clutch Holder
9Y1210220TRS0015US0
KiSC issued 07, 2012 A