Specification; Installation Notice - Rinnai RES-ED440H-W Instruction Manual

Machine body
Connection
mouth for pipe
Hand-rinsing basin
Pressure-relief pipe

Installation Notice

The water inlet and outlet pipe should not be connected in reverse.
The wall where electric water heater hang on should be firm, and can hold
two times as the weight of the electric water heater fully filled with water.
Security caution:
In order to prevent accident, only use the accessories our company offer and
couldn't changed or replace without any notice.
If the accessory is damaged, should be notify our after sales service
department to maintain and replace with the accessories our company offer.
If don't comply to above items and cause some accident, our company won't
hold any responsibilities to the direct loss or indirect caused by that.
The power plug must be properly grounded and it is prohibited to use the tap
water pipe line as grounding. In the power plug, the nul line shall not be
connected the ground wire. To prevent electric shock, the ground wire shall
not be electrified.
Diagram 5
Power source wire
with electricity
leakage protection
Mono-directional
security valve
Water inlet valve
Tap water pipe
Mixed water
valve
6

Specification

Model
Rated capacity
Rated voltage
Rated pressure
Rated temperature
Rated power
Shower
Water proof degree
Socket
Heating effeciency
Structure type
Installation method
Heat Loss in
(kWh)
Dimension
Dimension
RES-ED440H-W RES-ED450H-W RES-ED480H-W
40L 50L
220V
0.7 mPa
° °
30 ~ 80 C (Selectable)
500W, 1000W, 1500W (Selectable)
IPX4
220V ~ 10A
> 90 %
Hermetical type water storage style
Horizontal
24 Hours
0.70 1.05
MODEL
RES-ED440H-W RES-ED450H-W RES-ED480H-W RES-ED4100H-W
A 380 380
B 685 801
C 238 238
D 200 316
E 392 392
F 202 202
G G ½" G ½"
H 100 100
B
C D
H
RES-ED4100H-W
80L 100L
1.4 1.6
430 430
958 1118
263 263
420 580
442 442
227 227
G ½" G ½"
100 100
E
G
F