Charging - Hitachi UC 18YGL2 Handling Instructions Manual

English

CHARGING

Before using the power tool, charge the battery as follows.
1. Connect the charger's power cord to the receptacle.
When connecting the plug of the charger to a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the charger till it contacts the bottom of the charger and
checking the polarities as shown in Fig. 1.
Battery (EB912S,
EB9S, EB914S ,
EB914, FEB9S,
EB9B, EB924,
EB926H, EB930H,
EB933X)
Battery
(EB712S, EB7S,
EB714S, FEB7S,
EB7B)
CAUTION
If the batteries are inserted in the reverse direction, not only recharging will
become impossible, but it may also cause problems in the charger such as a
deformed recharging terminal.
Battery (EB12S, FEB12S, EB12B, EB1226H, EB1230H)
Battery (EB1212S, EB1214S, EB1214L, EB1220BL, EB1224,
EB1230HL, EB1230X, EB1233X)
Battery (EB1412S, EB1414S, EB1414, EB14B, EB1424,
EB1426H, EB1430H, EB1430X, EB1433X)
Nameplate
Fig. 1
Battery (BCL1415)
Battery (BCL1430, EBL1430)
Battery (EB1812S, EB18B, EB1820,
EB1830H)
Battery (EB1814SL, EB1820L,
EB1824L, EB1826HL, EB1830HL,
EB1830X, EB1833X)
Hole for
connecting the battery
Pilot lamp
14
Battery (BCL1815)
Battery
(EBM1830)