Do you have a question about the UC 18YGL and is the answer not in the manual?
Questions and answers
Michael J Casper
May 21, 2025
cannot get the battery out of uc 18yg
1 comments:
Mr. Anderson
May 24, 2025
To remove the battery from a Hitachi UC18YGL charger, first disconnect the charger from the power source. Then, pull the battery out of the battery installation hole. Wait at least 3 seconds before reinserting it to ensure proper operation.
Page 1
MODEL UC 18YGL Hitachi Power Tools TECHNICAL DATA CHARGER UC 18YGL SERVICE MANUAL LIST No.: G886 Aug. 2007 SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT...
Page 2
Hitachi Power Tools LIST NO. G886 ELECTRIC TOOL PARTS LIST CHARGER 2007 • • Model UC 18YGL (E1)
Page 3
PARTS UC 18YGL ITEM CODE NO. DESCRIPTION REMARKS USED 328-539 HITACHI LABEL 321-679 PRISM 326-281 CASE (A).(B) SET 318-262 CORD 318-259 CORD FOR USA, CAN 318-260 CORD FOR AUS 318-261 CORD FOR GBR 319-780 FUSE (250V-3.15A) 326-285 TERMINAL (A) PRINTED CIRCUIT BOARD ASS’Y 120V INCLUD.
Need help?
Do you have a question about the UC 18YGL and is the answer not in the manual?
Questions and answers
cannot get the battery out of uc 18yg
To remove the battery from a Hitachi UC18YGL charger, first disconnect the charger from the power source. Then, pull the battery out of the battery installation hole. Wait at least 3 seconds before reinserting it to ensure proper operation.
This answer is automatically generated