Specifications; Applications; Charging Method - Hitachi UC 18YGSL Safety Instructions And Instruction Manual

English

SPECIFICATIONS

Model
Input power source Single phase: AC 120 V, 60 Hz
Charging time
Charger
Weight

APPLICATIONS

For charging the HITACHI batteries types BSL14, BSL18 series.

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
1. Insert the plug of battery charger into the receptacle.
When the plug of battery charger has been inserted into the receptacle, pilot lamp will
blink in red. (At 1-second intervals)
8
UC18YGSL
Approx. 40 minutes .... BSL1415, BSL1415X, BSL1815, BSL1815X
Approx. 90 minutes .... BSL1430, BSL1830
Charging voltage ........ DC 14.4 V–18 V
Charging current ........ DC 2.0 A
0.9 lbs (0.4 kg)
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
WARNING:
Do not use the electrical cord if damaged. Have
it repaired immediately.