MV Agusta BRUTALE 910 S Workshop Manual page 68

Remove the disk pusher plate.
If the friction rod must be slipped off, it is
important to replace it from the cylindrical
B
side of the friction control (left side of the
engine) in order to prevent the oil seal (1)
from damaging. See the illustration on the
following page with the slot for the lubrica-
tion facing towards the friction side.
Manually remove all of the attrition disks (3) that you
can.
Subsequently straighten the nut washer.
Unscrew the nut using tool n° 800079015 to hold the
clutch hup still and remove it.
Remove the washer (6) and friction bell (7).
Engine
3
7
- 52 -
6