MV Agusta BRUTALE 910 S Workshop Manual page 105

Verify the O-rings placed on the oil head delivery con-
duit for wear and substitute them, if necessary.
When reassembling, grease both O-rings and position
the upper part of the conduit in the seat arranged within
the head and the lower part of the counduit in the seat
arranged in the oil tubing support plate.
Tighten the upper fixing screw of the oil head delivery
conduit to a clamping torque of 10 Nm.
Carry out the same operation for the lower fixing screw
by tightening it to a clamping torque of 10 Nm.
Engine
- 89 -
10 N•m
10 N•m
B