Supported External Devices - Canon LX-MU700 User Manual

For simplicity and ease of operation, the projector provides diverse networking and remote management
features.
The LAN/RJ45 function of the projector through a network, such as remotely manage: Power On/Off,
Brightness and Contrast settings. Also, projector status information, such as: Video-Source, etc.
The projector can be controlled by a PC (Laptop) or other external device with connecting to the
projector's LAN/RJ45 port.
Wired LAN Terminal Functionalies
Remote control and monitoring of a projector from a PC (or Laptop) via wired LAN is also possible.
Compatibility with Crestron / AMX (Device Discovery) / Extron control boxes enables not only collective
projector management on a network but also management from a control panel on a PC (or Laptop)
browser screen.
■ Crestron is a registered trademark of Crestron Electronics, Inc. of the United States.
■ Extron is a registered trademark of Extron Electronics, Inc. of the United States.
■ AMX is a registered trademark of AMX LLC of the United States.
Note:
There is a limitation of power on/off control sequence in Network mode. It must take around 8~9 sec
after executing the power on command, regardless over the keypad, remote or IP.

Supported External Devices

This projector is supported by the specified commands of the Crestron Electronics controller and related
software (ex, RoomView
http://www.crestron.com/
This projector is supported by AMX (Device Discovery).
http://www.amx.com/
This projector is compliant to support Extron device(s) for reference.
http://www.extron.com/
(Ethernet)
®
).
46