SERVICE Menu
Label
Model
Serial Number
Software Version 1
Software Version 2
Control / Remote ID
Active Source
Pixel Clock
Signal Format
H/V Refresh Rate
Lamp 1 / 2 Time
Power On Time
Factory Reset
Displays the projector model name.
Displays the projector serial number.
Displays the version of the installed software part I in the projector.
Displays the version of the installed software part II in the projector.
Display the control ID / Remote ID.
Displays the connected input source.
Displays the pixel clock of the connected input source.
Displays the signal format of the connected input source.
Displays the H/V refresh rate of the projected image.
Displays the using hours of Lamp 1 / 2.
Displays the operation time.
Press ENTER to restore the OSD to the default settings.
Note:
Factory Reset will not reset the following settings.
■
Lamp Warning Display
■
Lens Memory
■
Network
■
Language
■
Lamp 1 / 2 Time
■
Power On Time
57
Description