Table of Contents
Advertisement
RS232 by Telnet Function
Besides projector connected to RS232 interface with "Hyper-Terminal" communication by dedicated
RS232 command control, there is alternative RS232 command control way, so called "RS232 by
TELNET" for LAN/RJ45 interface.
Quick Start Guide for "RS232 by TELNET"
Check and get the IP address on OSD of the projector.
Make sure that laptop/PC can access the web-page of the projector.
Make sure that "Windows Firewall" setting to be disabled in case of "TELNET" function filtering out by
laptop/PC.
Start → All Programs → Accessories → Command Prompt
Input the command format as seen in the following:
telnet ttt.xxx.yyy.zzz 7000 ("Enter" key pressed)
(ttt.xxx.yyy.zzz: IP address of the projector)
If Telnet-Connection ready, and user can have RS232 command input, then "Enter" key pressed, the
RS232 command will be workable.
51
Advertisement
Table of Contents
