Advertisement
Contents
Connections
Connecting a power amp
Connect a power amp (sold separately) to the PRE OUT connector of
0
this unit.
This unit has UNBALANCED RCA PRE OUT connector and
0
BALANCED XLR PRE OUT connector. Connect to the correct
connector for your power amp. If your power amp has both connectors,
connect to either of them.
Connect the speakers to the power amp.
0
For details on speaker connections, see the User Guide for the power
0
amp.
This section shows how to make a 11.1-channel connection by using a
0
surround speaker.
For how to make other speaker connections, see page 43.
Front panel
Display
Playback
Settings
GAV7702 BALANCED XLR PRE OUT connector PIN arrangementH
The PIN arrangement in this device uses the European method.
In the USA method, B is COLD, and C is HOT.
When connecting a device that utilizes the USA type of PIN arrangement,
replace the B and C plugs on one side of the balanced cable.
NOTE
0 Do not short the HOT and GND or COLD and GND for use.
0 Disconnect this unit's power plug from the power outlet before connecting the
speakers.
Also, turn off the power amp and subwoofer.
Rear panel
39
Tips
1
2
3
.
A GND (Ground)
B HOT (+)
C COLD (–)
Remote
Index
Appendix
Advertisement
