Advertisement
Contents
Connections
o Dynamic Compression
Compress dynamic range (difference between loud and soft sounds).
Automatic dynamic range compression
Auto:
on/off control according to source.
Low / Medium / High:
These set the compression level.
Off:
Dynamic range compression is always off.
0 "Dynamic Compression" can be set when Dolby Digital, Dolby Digital Plus or
Dolby TrueHD signal is input.
0 The default setting is "Off". When the input signal is the Dolby TrueHD or
Dolby Atmos source, the default setting is "Auto".
Front panel
Display
Playback
Settings
o Low Frequency Effects
Adjust the low frequency effects level (LFE).
n
-10 dB – 0 dB (Default : 0 dB)
n
0 dB / +5 dB / +10 dB / +15 dB (Default: +10 dB)
For proper playback of the different sources, we recommend setting to the
values below.
0 Dolby Digital sources : 0 dB
0 DTS movie sources : 0 dB
0 DTS music sources: -10 dB
o Center Gain
Distributes the dialogue output from the center channel to the front left
and right channels and widens the sound image in the front.
0.0 – 1.0
0 You can set this when the sound mode is set to DTS Neo:X.
0 The smaller the value, the more dialogue is concentrated on the center
channel. The larger the value, the more dialogue is distributed to front left and
right channels, and the more the sound image widens in the front.
Rear panel
176
Tips
When "Input Mode" is set other than to "7.1CH IN"
When "Input Mode" is set to "7.1CH IN"
Remote
Index
Appendix
Advertisement
