Marantz AV7702 Owner's Manual page 198

Av pre tuner

Hide thumbs Also See for AV7702:

Set the video signal format to be output for the TV you are using.

"Format" can also be set by the following procedure. However, the menu screen

is not displayed. Following the display content to make the setting.

1. Press and hold the main unit's STATUS and ZONE SELECT at the same time

for at least 3 seconds.

"Video Format <NTSC>" appears on the display.

2. Use the main unit's o or p and set the video signal format.

3. Press the main unit's ENTER to complete the setting.

When a format other than the video format of the connected TV is set, the picture

will not be displayed properly.

Select NTSC output.

Select PAL output.