Advertisement
Contents
Connections
8
Move the Sound calibration microphone to position 2,
select "Continue", then press ENTER.
The measurement of the second position starts.
Measurements can be made in up to eight positions.
Audyssey Setup
Place the microphone ear level at the 2nd listening position,
which should be no more than 2 ft (60cm) away from the 1st
position, then select "Continue"...
Ear Height
Back
.
To skip measuring the second and subsequent listening position, press o to
select "Complete" and press ENTER to proceed to step 11.
n Stopping Audyssey
A Press BACK to display the popup screen.
B Press o to select "Yes", then press ENTER.
Front panel
Display
Playback
Complete
Continue
®
Setup
Rear panel
Settings
9
Repeat step 8, measuring positions 3 to 8.
10
Select "Continue", then press ENTER.
Audyssey Setup
Measurements complete.
Select Continue to analyze the data...
Repeat Last Test
.
Start the analysis and storage of the measurement results.
Analysis takes several minutes to complete.
0
The more speakers and measurement positions that there are,
the more time it takes to perform the analysis.
NOTE
When the measurement results are being saved, make sure the power is not
turned off.
208
Remote
Tips
Appendix
Continue
Index
Advertisement
