Advertisement
Contents
Connections
o Detailed settings when "Assign Mode" is set to
"9.1ch (Bi-Amp)"
When "Assign Mode" is set to "9.1ch (Bi-Amp)", set the following items.
n Pre-out for Bi-Amp
Select the PRE OUT connectors used for the bi-amp connection of
front speakers.
FRONT WIDE/
Make the bi-amp connection by using the FRONT
HEIGHT2
PRE OUT connectors and FRONT WIDE/
(Default):
HEIGHT2 PRE OUT connectors.
Make the bi-amp connection by using the FRONT
HEIGHT1:
PRE OUT connectors and HEIGHT1 PRE OUT
connectors.
Make the bi-amp connection by using the FRONT
SURROUND
PRE OUT connectors and SURROUND BACK
BACK:
PRE OUT connectors.
Front panel
Display
Playback
Settings
n Height Speakers
Select the number of the height speakers used in MAIN ZONE.
None:
2 Height Speakers
(Default):
4 Height Speakers:
Using Dolby Speakers:
Rear panel
218
Tips
Uses no height speakers.
Uses a set of (two) height speakers.
Uses two sets of (four) height speakers.
Uses a Dolby enabled speaker placed on
the floor.
Remote
Index
Appendix
Advertisement
