Scrolling the picture in CINEMA mode/Auto 4:3 Default
Notes:
•
AUTO 4:3 DEFAULT is available only
for AUTO picture size setting.
•
In COMPONENT mode, AUTO
4:3 DEFAULT is available only for
480i/576i mode.
28
32L0141B_Eng.indd 28
32L0141B_Eng.indd 28
Scrolling the picture in CINEMA mode
When the CINEMA mode is selected, you can adjust the vertical
picture position.
Note:
You cannot move the picture vertically in any of the other picture
modes.
1
Press MENU, the menu will
appear on the screen. Press
or
to select
(SETUP)
menu. Press
or
VERTICAL POSITION, then
press ENTER.
2
Press
or
to adjust the
vertical position of the picture.
•
To raise the picture, press
•
To lower the picture, press
Note: You can adjust the vertical position upwards by up to
+10 and downwards by up to –10.
3
Press EXIT to return to the normal screen.
Auto 4:3 Default
This option selects the default way that a 4:3 signal is shown -
either as normal '4:3' or expanded in the '16:9' mode, according
to your preferences.
1
Press MENU, the menu will
appear on the screen. Press
or
to select
(SETUP)
menu. Press
or
AUTO 4:3 DEFAULT, then press
ENTER.
2
Press
or
to select 4:3 or 16:9.
3
Press EXIT to return to the normal screen.
AUTO TUNING
MANUAL TUNING
to select
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
AUTO 4:3 DEFAULT
EXIT : END
MENU: RETURN
VERTICAL POSITION
.
EXIT : END
MENU: RETURN
.
VERTICAL POSITION
EXIT : END
MENU: RETURN
AUTO TUNING
MANUAL TUNING
to select
CH ALLOCATION
LANGUAGE
ENGLISH
VERTICAL POSITION
AUTO 4:3 DEFAULT
16:9
EXIT : END
MENU: RETURN
0
16:9
0
10
–10
0
16:9
6/7/2007 9:21:20 AM
6/7/2007 9:21:20 AM