Scrolling The Picture In Cinema Mode; Auto 4:3 Default - Toshiba 32W300P Operating Instructions Manual

Scrolling the picture in CINEMA mode/Auto 4:3 Default
Notes:
• AUTO 4:3 DEFAULT is available only
for AUTO picture size setting.
• In COMPONENT mode, AUTO 4:3
DEFAULT is available only for 480i/
576i mode.
30E2825A_En_P25-31

Scrolling the picture in CINEMA mode

When the CINEMA mode is selected, you can adjust the
vertical picture position.
Note:
You cannot move the picture vertically in any of the other
picture modes.
1
Select
VERTICAL
POSITION.
Then press
2
Press
to adjust the
vertical position of
the picture.
• To raise the
picture, press
• To lower the
picture, press
Note: You can adjust the vertical position upwards by up
3
Press EXIT to return to the normal screen.

Auto 4:3 Default

This option selects the default way that a 4:3 signal is shown -
either as normal "4:3" or expanded in the "Full screen" mode,
according to your preferences.
1
Select AUTO 4:3
DEFAULT.
Then press
or
4:3 or FULL.
2
Press EXIT to return to the normal screen.
25
A U T O T U N I N G
M A N U A L T U N I N G
. C H A L L O C AT I O N
T E L E T E X T L A N G U A G E
L A N G U A G E
V E R T I C A L P O S I T I O N
A U T O 4 : 3 D E F A U LT
: SELECT
EXIT : END
or
S C R O L L A D J U S T M E N T
.
ENTER
.
S C R O L L A D J U S T M E N T
E N T E R
to +20 and downwards by up to -10.
A U T O T U N I N G
M A N U A L T U N I N G
C H A L L O C AT I O N
to select
T E L E T E X T L A N G U A G E
L A N G U A G E
V E R T I C A L P O S I T I O N
A U T O 4 : 3 D E F A U LT
: S E L E C T
E X I T : E N D
1/15/07, 8:27 PM
W E S T
F U L L
: ADJUST
MENU : RETURN
+ 1 0
: ADJUST
: SET
– 1 0
: A D J U S T
: S E T
W E S T
4 : 3 / F U L L
: A D J U S T
M E N U : R E T U R N
25