Connection To Other Equipment - Toshiba 32W300Ps Operating Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

1. Connecting other units to your TV

Satellite antenna

Satellite

receiver

VCR

DVD player:

For superior picture quality, set your DVD player to output an RGB signal (refer to your particular DVD player

owner's manual). Always connect DVD players (and other equipment which can output an RGB signal) to

(1) (AV1) or

with RGB signals. Select 'RGB' in the 'AV1 INPUT' or 'AV2 INPUT' option (see page 35 section6/part2).

Select AV1 or AV2 input mode (see note below).

Notes:

•

S-Video signals can be played back either through the

SCART socket, or the

SCART socket or the

Select 'S-VIDEO' in the 'AV1 INPUT' or 'AV2 INPUT' option (see page 35 section6/part2).

•

DVD players should always be connected to the TV directly, not connected through a video recorder. This

is because the copy-guard used on some DVDs can cause picture disturbance if connected in this way.

•

Throughout the signal inputted from HDMI-1/2 (HDMI connection), neither the image nor the sound will

be outputted from

•

Throughout the signal inputted from Component input, HDMI-1/2 (DVI connection) or PC Monitor input,

the image will not be outputted from

2. Connecting a decoder

TV (Left side view)

(All illustrated SCART cables are not supplied)

You can use the

Notes:

•

The video and sound signals from the tuner will always be output from

•

Do not connect the decoder to the

32L0141B_Eng.indd 33