Dnr; Selecting The Colour Temperature - Toshiba 32W300Ps Operating Instructions Manual

Note:
In HDMI1, HDMI2, or COMPONENT
mode, the "DNR" option cannot be
selected.
32L0141B_Eng.indd 25 32L0141B_Eng.indd 25
DNR/Selecting the colour temperature

DNR

DNR (Digital Noise Reduction) can reduce the roughness of the
picture.
1
Press MENU, the menu will
appear on the screen.
Press
(PICTURE) menu.
2
Press
then press ENTER.
Then press
OFF, LOW, MEDIUM or HIGH.
3
Press EXIT to return to the normal screen.

Selecting the colour temperature

Change the picture quality by selecting from three preset colour
temperatures - cool, medium and warm - as described in the
following table;
1
Press MENU, the menu will
appear on the screen.
Press
(PICTURE) menu.
2
Press
COLOUR TEMPERATURE, then
press ENTER.
Press
desired setting.
3
Press EXIT to return to the normal screen.
or to select
or to select DNR,
or to select
or to select
or to select
or to select the
Mode Picture Quality
COOL Bluish
MEDIUM Neutral
WARM Reddish
E
PICTURE PREFERENCE
SPORTS
BRIGHTNESS 25
CONTRAST 50
COLOUR 25
TINT 0
SHARPNESS 0
EXIT : END MENU: RETURN
DNR OFF
COLOUR TEMPERATURE
COOL
BLUE BACK ON
BACKLIGHT 16
RESET
OFF
EXIT : END MENU: RETURN
DNR
OFF
EXIT : END MENU: RETURN
PICTURE PREFERENCE
SPORTS
BRIGHTNESS 25
CONTRAST 50
COLOUR 25
TINT 0
SHARPNESS 0
EXIT : END MENU: RETURN
DNR OFF
COLOUR TEMPERATURE
COOL
BLUE BACK ON
BACKLIGHT 16
RESET
COOL
EXIT : END MENU: RETURN
25
6/7/2007 9:21:19 AM 6/7/2007 9:21:19 AM