Getting Your Messages - Uniden XDECT SSE27 series Owner's Manual

Ans. Setup menu options
You can change the answering system options from any station. Just open
the menu and select Ans. Setup.
Record Greeting (Base only) Record an outgoing message (see page 24)
Greeting
Options
Security Code
Ring Time
Record Time
Message Alert
Call Screen
Ans. On/off

Getting Your Messages

Accessing your answering system from a handset
You can access your system from a cordless handset whenever the phone
is in standby.
Use
PHONEBOOK/LEFT
to the previous option.
(Base only) Change greetings or delete your personal
greeting (see page 24).
Enter a 2-digit PIN so you can access your answering
system from any touch-tone phone (see page 27).
Set the number of rings (6, 9, or 12) before the answering
system answers the phone. Choose Toll Saver to have the
system pick up after 2 rings if you have new messages or
after 4 rings if you don't.
Set the amount of time callers have to leave a message,
either 1 minute or 4 minutes. Choose Announce Only if
you don't want the system to let callers to leave a message.
Have the system beep every 15 seconds when you have
a new message; the beeping stops when you listen to all
your new messages. (To mute the alert without listening to
your messages, press any key on the base.)
Turn on the call screen feature so you can hear callers as
they leave messages on the base speaker (see page 26).
(Handset only) Turn your answering system on or off. (To
turn your system on or off from the base, just press
to go
Press
SELECT/MENU
choose the current option.
Press
MUTE/MESSAGES
remote operation mode.
Text To Speech
to
to start
Use
CALLER ID/RIGHT
go to the next option.
Press to stop
FLASH/EXIT
remote operation mode.
.)
ON/OFF
to
25